Latest Products 2024-25
Showing 46–60 of 162 resultsSorted by latest
-
Rubber Pads for Lifts, Jacks & Wheel ChocksQuick ViewMetal Wheel Chock (Small) Passenger Car
- Sarv’s High quality Non slip Virgin rubber wheel chock or wedge efficiently and safely park the vehicle against them for repairing or parking the vehicle .
- Used for heavy to light commercial vehicles.
- Each chock Capacity: 20tons.
- Highly durable and sturdy , can easily withstand high and low temperatures.
- Comes with a steel bolt design for attaching chains.
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewMechanical Turn Table for Heavy Duty
- Sarv’s Range Of Wheel Alignment Accessories include range of high quality Wheel Alignment Clamps for wheels that require run out compensation.
- Our sturdy Wheel Clamps can strongly hold both Sensor arms or Targets for CCD Wheel Alignment and 3D Wheel Alignment Machines.
- Centre Hole comes in 15mm, 16mm and 20mm diameter.
- The clamps can fit rim sizes from 12-25″” and adjustable rods made of high quality steel.
- Uses Durable High quality jaw/claws- replaceable with Sarv part number 550127
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewMechanical Turn Table for Truck/ Buses
- Sarv’s Range Of Wheel Alignment Accessories include range of high quality Wheel Alignment Clamps for wheels that require run out compensation.
- Our sturdy Wheel Clamps can strongly hold both Sensor arms or Targets for CCD Wheel Alignment and 3D Wheel Alignment Machines.
- Centre Hole comes in 15mm, 16mm and 20mm diameter.
- The clamps can fit rim sizes from 12-25″” and adjustable rods made of high quality steel.
- Uses Durable High quality jaw/claws- replaceable with Sarv part number 550127
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewMechanical Turn Table (LCV)
- Sarv’s Range Of Wheel Alignment Accessories include range of high quality Wheel Alignment Clamps for wheels that require run out compensation.
- Our sturdy Wheel Clamps can strongly hold both Sensor arms or Targets for CCD Wheel Alignment and 3D Wheel Alignment Machines.
- Centre Hole comes in 15mm, 16mm and 20mm diameter.
- The clamps can fit rim sizes from 12-25″” and adjustable rods made of high quality steel.
- Uses Durable High quality jaw/claws- replaceable with Sarv part number 550127
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewMechanical Turn Table (Low Height)
- Sarv’s Range Of Wheel Alignment Accessories include range of high quality Wheel Alignment Clamps for wheels that require run out compensation.
- Our sturdy Wheel Clamps can strongly hold both Sensor arms or Targets for CCD Wheel Alignment and 3D Wheel Alignment Machines.
- Centre Hole comes in 15mm, 16mm and 20mm diameter.
- The clamps can fit rim sizes from 12-25″” and adjustable rods made of high quality steel.
- Uses Durable High quality jaw/claws- replaceable with Sarv part number 550127
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewMechanical Turn Table with Rubber Stoppers
- Sarv’s Range Of Wheel Alignment Accessories include range of high quality Wheel Alignment Clamps for wheels that require run out compensation.
- Our sturdy Wheel Clamps can strongly hold both Sensor arms or Targets for CCD Wheel Alignment and 3D Wheel Alignment Machines.
- Centre Hole comes in 15mm, 16mm and 20mm diameter.
- The clamps can fit rim sizes from 12-25″” and adjustable rods made of high quality steel.
- Uses Durable High quality jaw/claws- replaceable with Sarv part number 550127
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewMechanical Turn Table
- Sarv’s Range Of Wheel Alignment Accessories include range of high quality Wheel Alignment Clamps for wheels that require run out compensation.
- Our sturdy Wheel Clamps can strongly hold both Sensor arms or Targets for CCD Wheel Alignment and 3D Wheel Alignment Machines.
- Centre Hole comes in 15mm, 16mm and 20mm diameter.
- The clamps can fit rim sizes from 12-25″” and adjustable rods made of high quality steel.
- Uses Durable High quality jaw/claws- replaceable with Sarv part number 550127
(0 reviews) -
Latest Products 2024-25Quick ViewClamp for Measuring Head of wheel Alignment M/c Three Point
- Sarv’s Wheel balancing pressure cup for Quick Release Nut is used for proper positioning of wheel balancer wing nut or quick release clamp with 40mm shafts .
- They help the quick release nut/wing nuts/front wing nut for locking the wheels from outside.
- It is comes along with Rubber ring to protect wheels from damage.
- Rubber ring is replacable with part number 1104050R
- Use with Sarv Quick Release Wing Nut 1104059
- These are made with high impact nylon and are durable and sturdy.
(0 reviews) -
Latest Products 2024-25Quick ViewWheel Clamps
- Sarv’s Wheel balancing pressure cup for Quick Release Nut is used for proper positioning of wheel balancer wing nut or quick release clamp with 40mm shafts .
- They help the quick release nut/wing nuts/front wing nut for locking the wheels from outside.
- It is comes along with Rubber ring to protect wheels from damage.
- Rubber ring is replacable with part number 1104050R
- Use with Sarv Quick Release Wing Nut 1104059
- These are made with high impact nylon and are durable and sturdy.
(0 reviews) -
Wheel Balancing Machine AccessoriesQuick ViewRubber Ring for Clamping Cup
- Sarv’s Wheel balancing pressure cup for Quick Release Nut is used for proper positioning of wheel balancer wing nut or quick release clamp with 40mm shafts .
- They help the quick release nut/wing nuts/front wing nut for locking the wheels from outside.
- It is comes along with Rubber ring to protect wheels from damage.
- Rubber ring is replacable with part number 1104050R
- Use with Sarv Quick Release Wing Nut 1104059
- These are made with high impact nylon and are durable and sturdy.
(0 reviews) -
Wheel Balancing Machine AccessoriesQuick ViewWheel Clamping Cup
- Sarv’s Wheel balancing pressure cup for Quick Release Nut is used for proper positioning of wheel balancer wing nut or quick release clamp with 40mm shafts .
- They help the quick release nut/wing nuts/front wing nut for locking the wheels from outside.
- It is comes along with Rubber ring to protect wheels from damage.
- Rubber ring is replacable with part number 1104050R
- Use with Sarv Quick Release Wing Nut 1104059
- These are made with high impact nylon and are durable and sturdy.
(0 reviews) -
Wheel Balancing Machine AccessoriesQuick ViewQuick Lock Nut for Wheel Balancer 36x3mm
- Sarv’s range of Wheel Balancing Accessories includes Quick release Wing Nut/Lock nut for speeding the wheel balancing process.
- It makes the wheel balancing process faster by quickly locking the wheel on the shaft. Its quick release threads allow quick nut to slide in and out of its locking position when its release lever is pressed.
- Made of high quality durable material.
- Suitable for shaft Size 36x3mm.
- Use with Sarv Standard Pressure Cup 1104049
- Use Sarv Insert 1123659 as an accessory for this quick lock nut
(0 reviews) -
Rubber Pads for Lifts, Jacks & Wheel ChocksQuick ViewFloor Jack Pad Kit Dia 77mm for Car (4 Pices)
- Sarv is proud to announce a wide range of High Quality Floor Jack Pad for Car lifts, Jacks, Tyre Changers etc.
- All our rubber pads are manufactured from solid high quality virgin natural rubber SBR with textile fibre that provides extra strength against mechanical stress and abrasion, durability and longetivity.
- This particular floor jack pad is suitable for Tesla models 3,S,X,Y.
- Universal design and shape to fit more of the passenger car jacks available.
- Each kit contain no. of 4 pieces of floor jack pad
(0 reviews) -
Rubber Pads for Lifts, Jacks & Wheel ChocksQuick ViewRubber Wheel Chock 245mm x 260mm x 140mm
- Sarv’s High quality Non slip Virgin rubber wheel chock or wedge efficiently and safely park the vehicle against them for repairing or parking the vehicle .
- Used for heavy to light commercial vehicles.
- Each chock Capacity: 20tons.
- Highly durable and sturdy , can easily withstand high and low temperatures.
- Comes with a steel bolt design for attaching chains.
(0 reviews) -
Latest Products 2024-25Quick ViewValve Core Screw Driver Standard Single Ended 1″ Stem Length (Red)
- Sarv’s range of Tyre Valve tools include high quality Valve core & cap removers or screw drivers. Made from High quality plastic , these efficiently and effectivity remove and install the valve cores and the caps without damaging them.
- The plastic handles are grooved to ensure a non slip and firm grip.
- Core drivers are carbon steel chrome plated which provide rigidity for inserting and removing valve core.
- This Valve Core Screwdriver is used for removing/installing for Large Bore Valve core (VG8).
(0 reviews)
