Truck Wheel Alignment
Showing all 6 results
-
Mechanical Turn TableQuick ViewCompare ProductWheel Alignment Turn Table for Truck / Buses with Scale Size : L-480 mm , W-480mm, H-74 mm , Dia : 480 mm , Weight : 45 kgs
- Sarv manufacturers a range of high precision Wheel Alignment Turn plates for high accuracy in Wheel Alignment Measurements.
- Turn plates are free floating with 360 degree movement in all directions , due to derlin balls underneath in a plastic cage which provide a low friction movement , and aid measure a variety of Alignment angles with accuracy.
- All Sarv Turn plates are robust with industrial grade designs and perfect for long term use.
- Comes with dual pin locking system to provide stability of slip plate for keeping the plates zeroed and in position while the vehicle drives up on them or even while turn plates are not in use
- These are equipped with built in handle for easy carriage and auto centering design
- This particular alignment Turntable is made from heavy duty steel , and light blue powder coated for anti rust finish and extended life span.
- Comes with a easy to read scale (0-60 Degrees left and right) which aids in easy reading of caster, camber and steering alignment.
- Slip Plate Diameter 350mm, 14″ .
- 120 Derlin Balls Used with Dia : 12mm.
- Capacity : 1500Kgs or 1.5 Ton each.
- Used for Truck Buss wheel alignment.
(0 reviews) -
Mechanical Turn TableQuick ViewCompare ProductWheel Alignment Turn Plates for Trucks/Buses with run up ramp
- Sarv manufacturers a range of high precision Wheel Alignment Turn plates for high accuracy in Wheel Alignment Measurements.
- Turn plates are free floating with 360 degree movement in all directions , due to derlin balls underneath in a plastic cage which provide a low friction movement , and aids in measuring a variety of Alignment angles with accuracy.
- All Sarv Turn plates are robust with industrial grade designs and perfect for long term use.
- Comes with dual pin locking system to provide stability of slip plate for keeping the plates zeroed and in position while the vehicle drives up on them or even while turn plates are not in use
- These are equipped with built in handle for easy carriage and auto centering design
- This particular alignment Turntable is made from heavy duty steel , and electroless nickel plated for anti rust finish and extended life span.
- Comes with a easy to read scale (0-60 Degrees left and right) which aids in easy reading of caster, camber and steering alignment. Slip Plate Diameter 350mm, 14″ . Size :
- 120 Plastic Derline Balls Used with Dia : 18mm
- Capacity : 7 Tonnes
- Used Heavy Commercial Vehicles and Truck Bus wheel alignment.
- The Run up ramp makes it easy for the vehicle to centre on the turntable.
(0 reviews) -
Brake Pedal DepressorsQuick ViewCompare ProductBrake Pedal Depressor Wheel Alignment Heavy Duty
- Sarv’s range of Wheel alignment machine accessories include Brake Pedal Depressors for Truck & Bus Wheel Alignment that securely presses the foot brake safely as required in all wheel alignment procedures to take accurate alignment readings.
- Its adjustable steel plate extends through the length of the bar and takes leverage against the driver’s seat to put constant pressure on the brake pedal.
- Made from high quality special steel
(0 reviews) -
Steering Wheel HoldersQuick ViewCompare ProductSteering Wheel Holder Stand Tool Wheel Alignment Passenger car
- Sarv’s Range of Wheel Alignment Machine accessories include steering wheel holders.
- Sarv’s steering wheel holders hold the steering wheel securely in one position to carry the 3D /CCD wheel alignment for adjusting toe-in , toe-out and in centering the steering wheel.
- Made from high quality Iron. Smooth hooks and base ensure a secure fit that won’t damage the steering wheel and seat covers.
- Pressing quick locking switch can adjust the height with a loaded spring to fit a wide variety of cars.
- Extends up to 14-1/2 inches.
- Base diameter 4-1/2 inches.
(0 reviews) -
Steering Wheel HoldersQuick ViewCompare ProductSteering Wheel Holder Stand Tool Wheel Alignment Quick Lifting Button
- Sarv’s Range of Wheel Alignment Machine accessories include steering wheel holders.
- Sarv’s steering wheel holders hold the steering wheel securely in one position to carry the 3D /CCD wheel alignment for adjusting toe-in , toe-out and in centering the steering wheel.
- Made from high quality Iron.
- This particular steering wheel holder is erogonomically designed with a thumb lock releaseSmooth hooks and base ensure a secure fit that won’t damage the steering wheel and seat covers.
- Pressing the locking switch can easily adjust the height with a loaded spring to fit a wide variety of cars. Erogonomically designed with a thumb lock release.
Extends up to 14-1/2 inches
Base diameter 4-1/2 inches
(0 reviews)
