All Products
Showing 91–105 of 736 results
-
Wheel Alignment Machine AccessoriesQuick ViewCompare Product
5 Pin Wheel Alignment Clamp with Grab arms
- Sarv’s premium Wheel Alignment Clamp with 5 pin holds the wheels from its side walls rather than traditional wheel rims. This provides a better grip to the clamp and also prevents the damage caused to the rims if any with the insertion of the wheel clamp adaptors in traditional method.
- Made from high quality steel to provide firm group while holding the tire side wall.
- Comes with a spring loaded locking mechanism to ensure clamp sits well on the tyre and at the desired position.
- The 5 legs of the wheel clamp are inserted on the wheel holes for support.
- The tyre is grabbed by 2 grab arms from the tread area on the sides and securely fits on the rim. The screw knob in the centre is rotated to adjust the degree of firmness of the grab arms to the tyre.
- Can easily fir on the tyres with rims size from 12”-24””
(0 reviews) -
Top Selling Products 2024-25Quick ViewCompare Product
Sarv Blister Seal Tubless Tyre Repair Kit
- Sarv’s anothervery popular puncture repair kit comes in blister packing.
- Sarv Specialises in Tools for quick, easy Permanent and Temporary Tubeless Tyre Puncture Repair.
- We offer a variety of Puncture Repair Kits for Moto, Bike, Passenger Cars, SUV, Trucks & Buses.
- The Spiral probe and Open eye Needle ergonomically designed Handles for firmer grip are handles made from High Quality plastic and provide strength and durability while working on clearing the injury and inserting the puncture repair strings.
- Kit Containts the Following Items :
- 4″ Spiral Probe in PG Handle 44SP07 – 1 No.
- 3″ Open Eye Needle in PG Handle 44OE07
- Cutting Knife 44CK07 – 1 No.
- Puncture Repair Strip with 5 Strings 4″long 44RS07- 1 No.
- Instruction Sheet – 1 No.
(0 reviews) -
StichersQuick ViewCompare Product
Ball Bearing Roller Stitcher (Stitching Wheel 1- 1/2″ Diameter X 1/4″ Width) for Tyre Repair Patch
- Use Sarv’s High quality stitchers to securely paste the tyre repair patch over the injury area by forcing out any/all trapped air bubbles for perfect adhesion.
- Extremely easy to use, just roll the stitcher through the length of the patch from middle to outside to eliminate all air bubbles and form a perfect seal between the tyre and the patch.
- Comes with Deep-cut gear-like teeth on the roller that provide more penetrating pressure to remove trapped air.
- Metal wheel ensure adequate pressure and Wooden handle for better grip.
- Comes with a ball bearing roller for easy rolling of the wheel.
- Used for Tyre Tube repair the same way.
(0 reviews) -
Latest Products 2024-25Quick ViewCompare Product
Valve Core Screw Driver Standard Single Ended 1″ Stem Length (Red)
- Sarv’s range of Tyre Valve tools include high quality Valve core & cap removers or screw drivers. Made from High quality plastic , these efficiently and effectivity remove and install the valve cores and the caps without damaging them.
- The plastic handles are grooved to ensure a non slip and firm grip.
- Core drivers are carbon steel chrome plated which provide rigidity for inserting and removing valve core.
- This Valve Core Screwdriver is used for removing/installing for Small Bore Valve core (TR412, TR413,TR414, TR415, TR418…).
(0 reviews) -
Top Selling Products 2024-25Quick ViewCompare Product
220218 with 31mm-24mm Conical Insert ( Tapered Hole)
- Sarv Manufactures more than 100 varierty of high quality Tyre changer accessories -Tire Changer Mount/Demount Tool Heads and Inserts in steel and plastic.
- The Steel mount Demount tool heads are made from high quality , durable stainless steel and are perfect for steel wheels.
- Sarv mount demount heads and inserts are very sturdy and high quality.
- They make the mounting and demounting processes easy while working on automatic tyre changing machines as they are designed to suit the shape of the rim.
- They have very smooth finish which reduces the friction while mounting or demounting the tyre over them.
- This particular model is designed for standard Passenger Car Tyres.
- This Sarv Tyre Changer Duckhead is made of premium cast steel for durable use and repeated long time service.
- Comes with tapered design for conical insert for tapered shaft insertion and 2 inside locking screws for better fitment.
- Tapered Hole Diameters: 31mm- 24mm.
- Note: Plastic Head Inserts Sarv # 222238, fits on this Model.
(0 reviews) -
Latest Products 2024-25Quick ViewCompare Product
Tyre Bead Breaking/ Tyre Bead Loosener Rubber Pad 400mm x 125 mm x 24 mm
- Sarv is proud to announce a wide range of High Quality Rubber Pads for Car lifts, Jacks, Tyre Changers etc.
- All our rubber pads are manufactured from solid high quality virgin natural rubber SBR with textile fibre that provides extra strength against mechanical stress and abrasion, durability and longetivity.
- This particular rubber pad is used on Passenger Car Tyre Changers to avoid scratches on the rims while breaking the bead.
- Comes with 6 bolt holes to secure them on the side of the tyre changer.
- LxBxH : 400mm x125mm x 24mm.
- Available in various other Sizes and designs.
- Please check our range of rubber pads.
- Weight: 1.365Kgs.
(0 reviews) -
Double Ended Wheel Wrench for TrucksQuick ViewCompare Product
30x33mm Double Ended Truck Wheel Wrench
- Sarv’s vast range of wheel service accessories include Double ended Wheel Spanners and Lug Wrench to easily remove and install lug nuts on Truck/Bus farm, and off-road vehicles.
- These are manufactured with heavy duty high quality heat treated chrome vanadium steel with and comes with a powder coating of rust resistant carbon steel finish.
- Manufactured to remove/install 30mm lug nut on from one side and 33mm lug nuts.
- Used with tightening and loosening with Tommy Bar – SARV part number. 220226.
(0 reviews) -
Rubber Pads for Lifts, Jacks & Wheel ChocksQuick ViewCompare Product
Scissor Lift Rubber Pad 150mmx 100mmx100mm
- Sarv is proud to announce a wide range of High Quality Rubber Pads for Car lifts, Jacks, Tyre Changers etc.
- All our rubber pads are manufactured from solid high quality virgin natural rubber SBR with textile fibre that provides extra strength against mechanical stress and abrasion, durability and longetivity.
- These are sturdy enough to support lifting point to lift the vehicle while soft enough to provide cushioning against the contact
- This particular Rectangular Rubber Pad is used as an accessory for universal scissor Lifts and jacking beams to safeguard the vehicle chassis from scratches against the lift body while lifting.
- Has a gradient design pattern for anti slip property.
(0 reviews) -
Wheel Balancing Machine AccessoriesQuick ViewCompare Product
Nylon Cap – Plastic Hammer head for Wheel Balancing Weight Plier.
- Nylon Cap for Wheel Balancing Weight plier
- Nylon Soft Head Cap is used as a replacement part for Wheel balancing weight plier and hammer 110101. Prevents Damage to expensive Alloy Rims
(0 reviews) -
Tubeless Tyre Repair StringsQuick ViewCompare Product
2″ Long Repair Strings for Bicycles
- Sarv’s Tubeless Tyre Premium Puncture Repair Strings are manufactured with high quality material and provide ample adhesion to seal tyre injuries for temporary repair.
- String’s high tensile strength yet flexibility due to twisted design ensures it does not break while inserting it in the needles and in the injury.
- Once the strings are inserted, the rubber securely seals the injury and provides great adhesion.
- Our Repair Strings come in various Sizes and colours.
- This particular string in 2″ long and Brown colour , designed specially for Bicycles
- 1 Tubeless tyre puncture repair Strip contains 5 Strips.
- Color : Brown
(0 reviews) -
Wheel Alignment Machine AccessoriesQuick ViewCompare Product
Wheel Alignment Clamp Adaptor Finger Tool
- Sarv Manufactures a range of Wheel Alignment adaptors or Finger tools for Wheel Alignment Clamps. These aid in installation of the wheel clamp on the wheels.
- Every clamp uses 4 pcs of these tools.
- Manufactured from high quality steel and durable , sturdy enough to securely keep the clamps installed on the wheel without any damage or slippage.
- Use on your preferred wheel clamp or SARV Wheel Clamp Part no. 551024, 550184, 550244
(0 reviews) -
StichersQuick ViewCompare Product
Small Roller Stitcher for Tyre Repair Patches
- Use Sarv’s High quality stitchers to securely paste the tyre repair patch over the injury area by forcing out any/all trapped air bubbles for perfect adhesion.
- Extremely easy to use, just roll the stitcher through the length of the patch from middle to outside to eliminate all air bubbles and form a perfect seal between the tyre and the patch.
- Comes with Deep-cut gear-like teeth on the roller that provide more penetrating pressure to remove trapped air.
- Metal wheel ensure adequate pressure and Wooden handle for better grip.
- Comes with a ball bearing roller for easy rolling of the wheel.
- Used for Tyre Tube repair the same way.
(0 reviews) -
Latest Products 2024-25Quick ViewCompare Product
Valve Core Screw Driver Standard Single Ended 1″ Stem Length (Black)
- Sarv’s range of Tyre Valve tools include high quality Valve core & cap removers or screw drivers. Made from High quality plastic , these efficiently and effectivity remove and install the valve cores and the caps without damaging them.
- The plastic handles are grooved to ensure a non slip and firm grip.
- Core drivers are carbon steel chrome plated which provide rigidity for inserting and removing valve core.
- This Valve Core Screwdriver is used for removing/installing for Small Bore Valve core (TR412, TR413,TR414, TR415, TR418 etc ).
(0 reviews) -
Top Selling Products 2024-25Quick ViewCompare Product
28mm Standard Steel Mount Demount Tool Passenger Car with Plastic Insert for Tyre Changer
- Sarv Manufactures more than 100 varierty of high quality Tyre changer accessories -Tire Changer Mount/Demount Tool Heads and Inserts in steel and plastic.
- The Steel mount Demount tool heads are made from high quality , durable stainless steel and are perfect for steel wheels.
- Sarv mount demount heads and inserts are very sturdy and high quality.
- They make the mounting and demounting processes easy while working on automatic tyre changing machines as they are designed to suit the shape of the rim.
- They have very smooth finish which reduces the friction while mounting or demounting the tyre over them.
- This particular model is designed for standard Passenger Car Tyres.
- This Sarv Tyre Changer Duckhead is made of premium cast steel for durable use and repeated long time service.
- Comes with attached plastic insert to prevent the wheels from scratches and damage and 4(2 inside ,2 side) locking screws for better fitment locking screws for better fitment.
- Installing Hole Diameter: 28mm / 1.1 inch.
- Plastic Head Inserts Sarv # 221038,, 220328, 220628, 221338 and Plastic Tail Insets Sarv # 220828 fits on this Model.
(0 reviews) -
Latest Products 2024-25Quick ViewCompare Product
Tyre Bead Breaking/ Tyre Bead Loosener Rubber Pad 380mm x 185 mm x 22 mm
- Sarv is proud to announce a wide range of High Quality Rubber Pads for Car lifts, Jacks, Tyre Changers etc.
- All our rubber pads are manufactured from solid high quality virgin natural rubber SBR with textile fibre that provides extra strength against mechanical stress and abrasion, durability and longetivity.
- This particular rubber pad is used on Passenger Car Tyre Changers to avoid scratches on the rims while breaking the bead.
- Comes with 4 bolt holes to secure them on the side of the tyre changer.
- Available in various other Sizes and designs.
- Please check our range of rubber pads.
(0 reviews)